OM Pimespo XE25ac Forklift Hata Kodları


Fiat OM Pimespo marka XE25ac Model Forklift Arıza Kodları ve anlamlarını bu başlık altında bulabilirsiniz.

OM Pimespo X25ac Hata Kodları

Alarm
N. NameDescriptionActions
1CAP.CHARGEThe Vcond does not
increase on ignition.
Possible causes:
· power part
· logic
· driver
· motor
Check the power fuse.
Check the integrity of the armoured
resistance on the 180 Ohm contactors.
Disconnect the battery outlet, discharge
any charge on the condensers with a
resistance (180 Ohm 5 W between the
+ and the - of the battery on the control)
and check that there is no short circuit
between the motor terminals and the
battery negative.
1CAP.CHARGEThe Vcond does not
increase on ignition.
Possible causes:
· power part
· logic
· driver
· motor
Check the power fuse.
Check the integrity of the armoured
resistance on the 180 Ohm contactors.
Disconnect the battery outlet, discharge
any charge on the condensers with a
resistance (180 Ohm 5 W between the
+ and the - of the battery on the control)
and check that there is no short circuit
between the motor terminals and the
battery negative.
2R VMN LOWIncorrect voltage on the
power outputs of the
right motor.
Possible causes:
· power part
· driver circuit
· motor
Check that the power connections of the
motor are correct.
Check that there is no insulation loss in
the motor.
Check that one of the motor phases is
not at the battery negative.
3L VMN LOW *Incorrect voltage on the
power outputs of the
left motor.
Possible causes:
· power part
· driver circuit
· motor
Check that the power connections of the
motor are correct.
Check that there is no insulation loss in
the motor.
Check that one of the motor phases is
not at the battery negative.
4R VMN HIGHIncorrect voltage on the
power outputs of the
right motor.
Possible causes:
· power part
· driver circuit
· motor
Check that the power connections of the
motor are correct.
Check that there is no insulation loss in
the motor.
Check that one of the motor phases is
not at the battery positive.
5L VMN HIGH *Incorrect voltage on the
power outputs of the
left motor.
Possible causes:
· power part
· driver circuit
· motor
Check that the power connections of the
motor are correct.
Check that there is no insulation loss in
the motor.
Check that one of the motor phases is
not at the battery positive.
OM Pimespo X25ac Hata Kodları